Please leave your email address, So that we can get in touch with you as soon as possible.
The SC200/200 Variable Frequency Low Speed Construction Hoist is equipped with a variable frequency drive (VFD), a crucial component in controlling the speed and power of the motor. This technology allows for smooth adjustments in motor speed, providing precise control during both acceleration and deceleration. Instead of immediately ramping up or down to full speed, the VFD allows the motor to gradually adjust to the desired operational speed. During a stop, the VFD also ensures a controlled reduction in speed, which prevents jerky movements that could destabilize the load or cause unnecessary strain on the motor and hoist system. This smooth start and stop function greatly reduces the impact forces experienced by the hoist, load, and surrounding structures, contributing to safer and more reliable performance.
The SC200/200 features an integrated soft start and soft stop function, which enhances its ability to start and stop gently. This function is essential when handling heavy loads, as it prevents the sudden jolt or shock that can occur with traditional hoists. The motor gradually increases its speed when starting, reducing the mechanical stresses that typically occur with abrupt acceleration. Similarly, when the hoist is stopping, the motor's deceleration is controlled and smooth, which ensures that the load is gradually brought to a halt. This helps prevent any sudden jerks, which could result in load slippage, tipping, or safety hazards. The soft start/stop mechanism plays a critical role in providing enhanced safety, particularly when handling fragile or sensitive materials.
The SC200/200 is equipped with load sensors that continuously monitor the weight of the load being lifted. These sensors provide real-time data to the control system, which can adjust the hoist's speed or halt operation in the event of an overload. This overload protection is particularly vital when dealing with large or uneven loads. If the system detects that the load exceeds its safe operating capacity, it will automatically trigger a controlled stop or slow down, preventing any potential damage to the hoist, motor, or load. By reducing the likelihood of overloading, the hoist minimizes the risk of sudden starts or stops that could occur due to the strain of lifting excessive weights, ensuring a higher level of safety during operation.
In addition to soft start features, the SC200/200 incorporates controlled deceleration as part of its braking system. Controlled deceleration refers to the ability to slow down the hoist in a gradual, predictable manner, preventing any abrupt halts that could result in mechanical stress or instability. This feature is especially useful when lowering heavy loads, as it reduces the momentum and ensures the load is lowered at a steady pace, rather than with a sudden stop that could cause it to swing or shift unpredictably. The precise deceleration ensures that both the hoist and load are stable throughout the lifting and lowering process.
To further enhance safety, the SC200/200 incorporates a dynamic braking system, which applies braking forces progressively to decelerate the hoist. Dynamic braking uses the motor's inherent resistance to generate braking force, allowing for smoother stops and reducing reliance on traditional mechanical brakes. The brake system is designed to apply force evenly and consistently, helping to avoid the sudden jerks or shocks that can occur with less advanced systems. This braking system is particularly beneficial when stopping the hoist under heavy load conditions, as it ensures that the load is stabilized without experiencing abrupt movements that could lead to swinging or instability.
